-- Phoenix R/C model variant file

function applyVariant()


-- Physical

   newObjectType.Model_setup = 60.2401
   newObjectType.Weight = 3.9091
   newObjectType.Vertical_centre_of_gravity = 0.2500
   newObjectType.Yaw_inertia = 0.0600
   newObjectType.Pitch_inertia = 0.0600
   newObjectType.Roll_inertia = 0.0600
   newObjectType.Frontal_drag_area = 0.1500
   newObjectType.Lateral_drag_area = 0.0900
   newObjectType.Vertical_drag_area = 0.0800
   newObjectType.Robustness = 45.0000
   newObjectType.Maximum_fuel_flight_time = 6.5000
   newObjectType.Pilot = 0

-- Motors/Servos

   newObjectType.Power = 2.8000
   newObjectType.Engine_RPM_at_max_torque = 15000.0000
   newObjectType.Main_gear_ratio = 7.5000
   newObjectType.Minimum_throttle = 0.0000
   newObjectType.Maximum_throttle = 1.0000
   newObjectType.Throttle_response = { 0.1000, 0.0600,  }
   newObjectType.Cyclic_servo_response = { 1.5000, 0.0000,  }
   newObjectType.Collective_servo_response = { 0.8500, 0.0000,  }
   newObjectType.Tail_servo_response = { 1.0000, 0.0250,  }

-- Options

   newObjectType.Training_Gear = 0
   newObjectType.Use_prebuilt_throttle_curve = 1

-- Fine_tuning

   newObjectType.Lift_tuning = 87.1542
   newObjectType.Cyclic_tuning = 120.0949
   newObjectType.Tail_power_tuning = 100.0000
   newObjectType.Knife_edge_tuning = 110.2767
   newObjectType.Tail_wash_tuning = 100.0000
   newObjectType.Engine_loading_tuning = 90.5063

-- Control_expo

   newObjectType.Elevator_expo = 0.4292
   newObjectType.Aileron_expo = 0.4292
   newObjectType.Rudder_expo = -0.4292

-- Main_Rotor

   newObjectType.Main_rotor_diameter = 1.3500
   newObjectType.Main_rotor_chord = 0.0500
   newObjectType.Minimum_pitch = -11.5000
   newObjectType.Mid_pitch = 1.0000
   newObjectType.Maximum_pitch = 12.5000
   newObjectType.Pitch_curve = 1.0000
   newObjectType.Blade_inertia = 0.3500
   newObjectType.Rotor_head_damping = 0.8500

   -- Lift

   newObjectType.Hovering_stability = 80.0000
   newObjectType.Ground_effect = 25.0000
   newObjectType.Induced_cyclic_power_loss = 21.0000
   newObjectType.Induced_tail_power_loss = 21.0000
   newObjectType.Vortex_lift_loss = 25.0000

-- Flybar

   newObjectType.Flybar_type = "Passive flybarless"
   newObjectType.Frontal_cyclic_response = 0.7680
   newObjectType.Lateral_cyclic_response = 0.7680
   newObjectType.Flybar_interaction = 20.2532

   -- Flybarless

   newObjectType.Flybarless_agility = 115.5063
   newObjectType.Flybarless_response = 105.2215
   newObjectType.Flybarless_gain = 50.0000
   newObjectType.Flybarless_active_response = 50.0000
   newObjectType.Flybarless_active_delay = 50.0000
   newObjectType.Flybarless_active_inverted = 0
   newObjectType.Flybarless_auto_trim_enabled = 0

-- Rotor_Governor

   newObjectType.Rotor_governor_enabled = 1
   newObjectType.Governor_rotor_speed = 2350.0000
   newObjectType.Governor_sensitivity = 80.0000
   newObjectType.Governor_rotor_advanced = 0
   newObjectType.Governor_rotor_speedA = 2000.0000
   newObjectType.Governor_rotor_speedB = 2000.0000
   newObjectType.Governor_rotor_speedC = 2200.0000

-- Tail_Rotor

   newObjectType.Gyro_mode = "Heading hold"
   newObjectType.Tail_drive_mode = "Head driven"
   newObjectType.Tail_RPM = 13000.0000
   newObjectType.Tail_rotor_diameter = 0.2700
   newObjectType.Tail_rotor_maximum_pitch = 45.0000
   newObjectType.Tail_rotor_minimum_pitch = 40.0000
   newObjectType.Gyro_sensitivity = 60.0000
   newObjectType.Servo_delay = 0.0000
   newObjectType.Max_pirouette_rate = 450.0000
   newObjectType.Tail_fin_area = 0.0150
   newObjectType.Tail_stabiliser_area = 0.0009

-- Undercarriage

   newObjectType.Frontal_gear_friction = 0.0350
   newObjectType.Lateral_gear_friction = 0.0350
   newObjectType.Gear_spring = { 0.0100, 1.0000,  }
   newObjectType.Guide_wheel_travel = 20.0000
   newObjectType.Gear_robustness = 60.0000

-- Sound

   newObjectType.Engine_sound_type = "500 class electric"
   newObjectType.Engine_sound_volume = 100.3953
   newObjectType.Engine_sound_pitch = 90.5063

-- Advanced

   newObjectType.Collective_crispness_tuning = 95.7278
   newObjectType.Collective_response_tuning = 100.4747

-- Control_profile

   newObjectType.Control_profile_override_enabled = 0
   newObjectType.Control_profile_override = 0
end